I am thinking of attending the nationals in 2024, however my boat does not have a measurement certificate. What would be the best way to get this. I have looked on this site for information but cannot find anything, if it is there could you point me in the right dire...

I am in the process of renovating an old kit built Miracle from the late seventies and would like some advice on the best self bailer or if one is even needed. The boat had two drain bungs in the transom but doubt these would be any good for draining water when saili...

Is anyone going to Girton, hardly any Assn publicity, and not easy to find details in Girton SC Website either Kathy and I do'nt want to find we are the only ones there Regards John

Hi All! We are soon to be the proud owners of boat number 3484 and cannot wait to get her out on the water at Bexhill Sailing Club. Being a complete newbie to Miracles, I would really appreciate if there is a rigging guide anyone can point me to. I know I will...

It it with great sadness that I read of the death of Eamom Cuthbert. I started Miracle Sailing with my children in 1980 so have known Eamon for most of that time. He was a Gentleman both on and off the water and a better representative of the true spirit of sailing...

Hi everyone, Firstly, does anyone know when my new/old boat was new? Sail number is 31.......that's thirty one! Second, does a rigging plan exist? Basically, I'm wanting to sort out which halyard does what around the mast area, and where they get tied off....

I sail Miracle 3078 with a plywood floor. The self bailers are Andersen Super Medium with six bolts. They have recently started to weep with relatively small amounts of water coming out from between the plywood and the top plate. I am guessing this is not unusual. Ha...

Welcome to the brand new forum for Miracle Dinghy users

Anyone else having problems with our website? I've registered for the 'new' arrangements for classified ads, but don't seem to get it to work? Probably user error!

I have just started building a Miracle dinghy. I got the Timber from Robbins, CNC routed by 4th dimension. I have a set of the original instructions (OI) that accompanied a kit and I have the usefully illustrated record of Brian Jones' build (BJ). Inevitably all are...